Pumps & Irrigation

The Mag 750 pump (EZWP750) is the replacement pump for the 64-site, and 128-site Low Pro systems. Also works as a replacement pump for the Original EZ Clone 60-site system. Pumps at the rate of 700 gallons/hour.  

The Mag 450 pump (EZWP450) is the replacement pump for the 16-site, and 32-site Low Pro systems. Perfectly paired with the 16-site and 32-site EZ-CLONE Cloning Systems to ensure the manifolds are receiving the proper flow of water,...

Replacement pump for the Original EZ Clone 128-site cloning system. Pumps at the rate of 1100 GPH. NOTE: The Mag 750 pump (EZWP750) is the replacement pump for the 64-site, and 128-site Low Pro systems.

Replacement spray head for EZ-Clone systems.

Dilution Solutions Nutrient Delivery System (NDS) Water Hammer Arrestor Kit 3/4 in (WHA34-SS-KIT)The Water Hammer Arrestor Kit for a 3/4 in system includes everything you need to stop water hammer on your system. The kit includes the following parts...

Dilution Solutions Nutrient Delivery System (NDS) Water Hammer Arrestor Kit 1 1/2 in (WHA150-SS-KIT)The Water Hammer Arrestor Kit for a 1 1/2 in system includes everything you need to stop water hammer on your system. The kit includes the...

Dilution Solutions Nutrient Delivery System (NDS) – DAB Starter Kit – 3/4 in (HYKSTART-DAB) Includes: Union, Check Valve, Elbows, Nipples, Hose Adapter, Banjo Ball Valves, Cross fitting, Y Filter, Pressure Gauge, Roll of Pink Teflon Tape...

Dilution Solutions Nutrient Delivery System (NDS) Starter Kit 3/4 in (HYKSTART)Protect your Dilution Solutions’ Nutrient Delivery System with all the necessary accessories for a successful installation. Includes incoming on/off ball valve, an...

Dilution Solutions Nutrient Delivery System (NDS) Starter Kit 1 1/2 in (HYKSTART150)Protect your Dilution Solutions’ Nutrient Delivery System with all the necessary accessories for a successful installation. The kit includes all the parts you need...

Dilution Solutions - Pressure GaugePART #: PG100-SS 3/4” Stainless Steel Gauge Bottom mount only 1/4” brass threads 0-100 psi 2” face. Reduces the risk of rust in wet/damp installations and extends the life of the component.

Dilution Solutions Lo-Flo (NDS) Kit, No-Monitor, 3/4 in (HYKNOMON)Dilution Solutions' Water-Powered NDS No Monitor Kit contains all the components included in the Monitor Kit except the monitor. To complete the LO-FLO NDS, you will also need...

Dilution Solutions Hi-Flo (NDS) Kit, No-Monitor, 1.5 in (HYKMON150)Dilution Solutions' Water-Powered NDS HI-FLO No Monitor Kit contains all the components included in the Monitor Kit except the monitor. To complete the HI-FLO NDS, you will also need...

Dosatron Water Powered Doser 14 GPM 1:3000 to 1:333 - 3/4 in (PJDI139MINI-H)Includes mounting bracket, suction hose, bypass, union, weighted strainer, and quick start guide. Mini-maintenance seal kit for Dosatron Dosers - should be replaced on an annual...

Dosatron Mini Seal Kit for D14MZ2 - 14 GPM (PJDI116MINI-H)Includes mounting bracket, suction hose, bypass, union, weighted strainer, and quick start guide. Mini-maintenance seal kit for Dosatron Dosers - should be replaced on an annual basis.

Dilution Solutions Nutrient Delivery System (NDS) Mixing Chamber Kit 3/4 in (HYKMC34)A well-blended solution is key to a successful dosing system. One way to get that homogenized blend is to add a mixing chamber to the Nutrient Delivery System. This...

Dilution Solutions Nutrient Delivery System (NDS) Mixing Chamber Kit 1 1/2 in (HYKMC150)A well-blended solution is key to a successful dosing system. A must have! One way to get that homogenized blend is to add a mixing chamber to the Nutrient...

Dilution Solutions 3/4 in Filter Kit with Unions – 200 Mesh/80 Micron (AKF5AP11KIT-A)Inline filter kit includes a cleanable, permanent, stainless steel filter that is a 200 mesh/80 micron. The inline connectors are 3/4 in FPT by 3/4 in FPT. No...

Dilution Solutions Flow Restrictor – 3/4 in 14 GPM (D14 Series) (FR34-14GPM)Flow Restrictors limit the flow of liquid in the line. It is recommended to install a flow restrictor on the inlet side of the Dosatron unit if there is any possibility of...

Dilution Solutions 3/4 in Flow Restrictor (FR34-10GPM or FR34-14GPM)Flow Restrictors limit the flow of liquid in the line. It is recommended to install a flow restrictor on the inlet side of the Dosatron unit if there is any possibility of...

Dilution Solutions Nutrient Delivery System (NDS) End Kit – 3/4 in (HYKEND)Dilution Solutions’ Nutrient Delivery System (NDS) End Kit with no monitor.

Dilution Solutions Nutrient Delivery System (NDS) End Kit - 1 1/2 in (HYKEND150)Dilution Solutions’ Nutrient Delivery System (NDS) End Kit with no monitor.

Dilution Solutions 3/4 in Mixing Chamber Sunshade (MC34-SHADE)Light blocking mixing chamber sunshade for 3/4″ mixing chambers. Prevents the light from impacting nutrient rich water, eliminating the potential for biofilm and algae growth in the...

Dilution Solutions 3/4 in Check Valve (CV34-PH) The Dilution Solutions CV34-PH check valve features a poly construction and is for use with Dosatron viton seal units requiring a 3/4" connection.

Dosatron Water Powered Doser 14 GPM 1:500 to 1:50 - 3/4 in (D14MZ2VFBPHY)Simplify your nutrients by directly installing Dosatron Doser into the water supply line. The Dosatron Doser operates by using water pressure as the power source (no electricity...

Dosatron Water Powered Doser 11 GPM 1:500 to 1:50 - 3/4 in (D25RE2VFBPHY)Dosatron water powered doser is directly installed in the water supply line. The Dosatron operates by using water pressure as the power source (no electricity needed). The water...

Dilution Solutions 1 1/2 in Filter with 300 Mesh Screen (AKF5AP40-A)) Dilution Solutions 200 Mesh Filter installs on the inlet side of the Dosatron injector to keep the system free of debris.

Dilution Solutions 1 1/2 in Check Valve (CV112) The Dilution Solutions’ CV112 check valve features a poly construction and is for use with Dosatron viton seal units requiring a 1 1/2" connection.

Active Aqua air stones are an ideal way to add oxygen to your hydroponic growing system. The micropore design energizes the growing solution as it aerates and circulates nutrients. Air stones will extend the life of your nutrient solution, help keep...

Active Aqua air stones are an ideal way to add oxygen to your hydroponic growing system. The micropore design energizes the growing solution as it aerates and circulates nutrients. Air stones will extend the life of your nutrient solution, help keep...

Active Aqua air stones are an ideal way to add oxygen to your hydroponic growing system. The micropore design energizes the growing solution as it aerates and circulates nutrients. Air stones will extend the life of your nutrient solution, help keep...

Active Aqua air stones are an ideal way to add oxygen to your hydroponic growing system. The micropore design energizes the growing solution as it aerates and circulates nutrients. Air stones will extend the life of your nutrient solution, help keep...

Active Aqua air stones are an ideal way to add oxygen to your hydroponic growing system. The micropore design energizes the growing solution as it aerates and circulates nutrients. Air stones will extend the life of your nutrient solution, help keep...

Active Aqua air stones are an ideal way to add oxygen to your hydroponic growing system. The micropore design energizes the growing solution as it aerates and circulates nutrients. Air stones will extend the life of your nutrient solution, help keep...

American Hydroponics 1/2" Ball Valve (Stopcock valve) with barbed fittings. Comes in packs of 10. This black 1/2-inch nylon inline ball valve with double-sided barbed fittings is perfect for adjusting flow rates.

Aerobuddy Timer + Power ControllerSay hello to Aerobuddy, an easy-to-use tool to help farmers like you save time and grow happy plants. Aerobuddy gives you complete control of aeration and mixing in your feed tank when used with an Aeromixer, making it...

Aeromixer Tall Tank Kit (for tanks over 5' tall)Aeromixer's Tall Tank Kit is 3/4 HP and perfect for tanks 50-2000 gallons that are OVER five feet tall. Only for use with organic fertilizers. This pump should not be used with Flexi-Tanks or soft walled...

Aeromixer Synthetic Pro Edition Specifically Designed for Synthetic Nutrients - If you prefer synthetic fertilizers in your feed tanks, Aeromixer Synthetic Pro is your new best friend. With upgraded heavy-duty components made of 316/304 stainless...

Aeromixer Original - Nutrient Mixer & Aerator Pump Kit (tanks 3' - 5' tall) Aeromixer Original is a pump made specifically for growers, by growers, with a dual purpose: to mix nutrients, change the settings, then aerate feeding solutions with just...

Aeromixer Mini  - Nutrient Mixer & Aerator Pump Kit (15+ gallons / tanks under 3' tall) The Mini Mixer has a 1/6 Horsepower motor and is best used in tanks 15-80 gallons and UNDER three feet tall! Only for use with organic fertilizers, the...

Angled stakes hold 1/4" tubing securely in place in a way that virtually eliminates kinks and clogs. The angle of the stake works with the natural curve of rubber tubing. Tubing can become crimped when forced to make a 90-degree turn. By using a...

10 pieces per pack

10 pieces per pack  

10 pieces per pack

Use to close the end of a 3/4" line.

Use to close the end of a 1/2" line.

Replacement pre-filter for use with Hydrofarm's Active Aqua AAPW400 submersible water pump (400 GPH). Keeps debris from entering your water pump, which extends the life of your pump and improves its efficiency.

Replacement pre-filter for use with Hydrofarm's Active Aqua AAPW250 submersible water pump (250 GPH). Keeps debris from entering your water pump, which extends the life of your pump and improves its efficiency.

Replacement pre-filter for use with Hydrofarm's Active Aqua AAPW160 submersible water pump (160 GPH). Keeps debris from entering your water pump, which extends the life of your pump and improves its efficiency.

Replacement impeller for the Active Aqua AAPW800 800 GPH pump.

Replacement impeller for the Active Aqua AAPW550 550 GPH pump.