Lighting Accessories

Easily hang your Daystar, Radiant, or Sunburst with the Reflector Hanging Hardware Kit.  

The Easy Glider light hanging kit is ideal for all your light and reflector hanging needs. It features easy push button and glide action to adjust your reflectors or lights for optimum performance. The all-metal construction features a 6 1/2 foot cable...

PHOTOBIO-VP 18” Power Link Cable, 18AWGHydrofarm offers a complete line of PHOTOBIO•VP LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducing liability,...

The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected and controlled from a centralized location.  The rugged modular system focuses on signal integrity, consistency, and reliability while offering fast, simple,...

The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected and controlled from a centralized location.  The rugged modular system focuses on signal integrity, consistency, and reliability while offering fast, simple,...

8' PHOTO•LOC 0-10V Communication cable kit provides the ability to send low voltage signal to a fixture to control light output and photo-period when used with controller.  Water and dust resistant push lock IP connectors.  Contains: (2)...

The Light Riser Hanging System makes hanging reflectors, filters or other equipment a snap. Simply secure one of the quick release carabiner clips to a firm location, attach the other clip to the object you want to hang, and then pull the cord until the...

Trolley Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. Installation is super simple, and there is even a tutorial video about it on YouTube (URL: https://www.youtube.com/watch?v=MIbtIWyNFp0). The Trolley Wheel Kit...

EXTREME DUTY TROLLEY WHEELS, for LightRail 3.0, 3.5 and 4.0. A suggested upgrade item for moving multiple lights and/or overweight loads such as heavier LED, plasma, or any light with an internal ballast weighing 35 pounds or more. They are engineered...

Auxilliary Trolley for LR3.5 (Slave Trolley)Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Drive Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. The Drive Wheel Kit comes packaged with a new tension spring and fasteners in a header labeled zip lock with instructions. Drive Wheel O-Ring Kit (Tension...

Includes: LRAAI3.5 - A six-foot rail and a six-foot pushrod LRAALHDWARE - One auxiliary trolley and a hardware pack (screws, nuts, and a zip tie) Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to festoon your power cords or cooling ducts.Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100...

6' Add A Lamp Slave (6' Push Rod/6' Rail). Move your lights back and forth across your growing area with a light mover. It helps to increase your light coverage area. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs Does not include...

LightRail 5 Commercial Drive 4 RPM kit From its “triple duty” extruded aluminum track, “wide and stable” carriage with “steel-on-steel” carrier bearings to the high torque 4 RPM instrument grade drive motor with ball bearing output shaft and “sure grip”...

LightRail 5 Auxiliary Rail This is used with LightRail 5 and a second Add a Bar Kit (AAB KIT LR5), see item “R”, to accommodate a 3 crossbar system. The LightRail 5 Auxiliary Rail Item is packed in a tube with installation hardware and instructions. ...

Auxiliary Trolley for the Light Rail 5.

The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for systems that demand more than 2 total crossbar setups...

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. With both a zero to 60 second adjustable time delay for promoting even growth from end to end and a two to four feet per minute adjustable...

Adjust-a-Drive MOTOR ONLY This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute...

Adjust-a-drive motor w/6' rail plus mounting hardware The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. For a rectangular growing area, a linear lamp moving system is preferable. The...

LightRail 4.20 AdjustaDrive Kit comes complete with a variable speed LightRail 4.0 AdjustaDrive Motor, a two-piece 2 meter (6’6”) Rail, an Add A Lamp Kit with another 2-meter Rail, Push/Pull Rod, Auxiliary Trolley, instructions and hardware for moving...

Normally a component in the LightRail Complete Kit, this 6' auxiliary rail can be used for extending the travel length of your LightRail setup by 6'.

These Tent Hanging Brackets will enable you to hang and run a LightRail 3.0, 3.5 or 4.0 light mover in your grow tent. They are straightforward and simple to install.  

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included.

RoboStik For LightRail 3.0, 3.5 and 4.0 The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to the direction of travel. This item is not needed when hanging a horizontal reflector parallel to the...

For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot...

LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth from end to end and allows for equal light-time...

10 RPM IntelliDrive motor (LR3.5ID9) w/6' rail plus mounting hardware For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 3.5 IntelliDrive is without question, the finest linear lamp-mover available...

Switch Stop Kit for LightRail 3.0, 3.5 and 4.0 For replacing the occasional misplaced switch stop. The SS KIT comes with 3 pairs of switch stops and that equals 6 thumb screws and 6 slide nuts. Packaged in a 4" x 4" ziplock. Light Rail 3.5 is rated to...

Use these strong stainless steel V-shaped hanger hooks to suspend most Hydrofarm reflectors (with the exception of models having integrated hangers) and PARsource GLS and GLX reflectors (remote series).       

100 feet of chain, which may be separated out to preferred lengths. Resistant to corrosion, this chain can be used to support your reflectors, fans, smaller carbon filters and other equipment.

The Phantom PHOTOBIO Advanced Quantum PAR Meter provides accurate and cost-effective measurement for any light source used in horticultural applications.  The Advanced Quantum PAR meter is designed to measure PAR (Photosynthetically Active...

This product is a precision instrument used to measure luminance (footcandles). The meter is fully cosine corrected for the angular incidence of light, meaning that if you are not holding the sensor perfectly perpendicular to the light source, the sensor...

Photosynthesis and plant growth depend on the sun or specially-designed lighting systems. But of that light reaching the plant, only specific types of energy (in the lighting spectrum) drive the photosynthesis process. Since light is the most...

Hydrofarm's Light Riser Hanging System makes it easy to hang LED's, light reflectors, carbon filters or other equipment. New improved design with a simple push button release. Simply secure one of the quick release carabiner clips to a firm...

Hydrofarm's 1/4" Light Riser System makes it easy to hang reflectors, filters or other equipment. New improved design with a simple push button release. Simply secure the quick release carabiner clip to a firm location, attach the other clip to the...

Heavy duty adapter that is the ideal solution for safely creating three additional outlets. You can change any single power outlet or any extension cord into 3 standard U-ground outlets when needed.

5' Lock & Seal Lamp Cord Extension We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords...

25' Lock & Seal Lamp Cord Extension We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords...

15' Lock & Seal Lamp Cord Extension We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords...

Keep your light shining bright. Hydrofarm's sockets are quality-made pulse-rated sockets and accommodate all bulbs, including 1000 watt sodiums and all position-oriented mogul base bulbs. Rest assured you're choosing safe and long-lasting products, as...

A mogul cap sits on the back of the mogul base socket, allowing you to attach a cordset. The mogul cap encloses the unit from electrical hazards such as loose wires, increasing the safety of your grow room setup.

Use CS53505 (All System Cord Set & Socket Only) and this item, CSHDWKT (Cordset Hardware Kit), together to wire into a ballast or use the Cordset Hardware Kit to wire the All System Cord Set assembly to any lamp cord.

Mogul-CMH Adapter E39/PGZ18  For use with type PGZ18 lamps only

All SystemTM 8' Cord Set with socket for vertical hanging of compact fluorescents No external reflector brackets required Patent #s: U.S. 7025,479, D 518,778,260  

All SystemTM Cord Set - w/15' 120V Power Cord for use with compact fluorescents We start with a 6KV pulse rated position-oriented mogul socket - the highest rating of any socket on the market. The socket is mounted on our exclusive All System cylinder...

25' 16/3 600V Male Lock & Seal Cord UL We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension...

This 16/3 600V Male Lock & Seal receptacle replaces the male end of a cordset and attaches that cordset to a BAREF, female Lock & Seal receptacle. Male ends of cordsets may occasionally suffer damage from arcing or fried cords. Also, DIY grow room...

We start with a 6KV pulse rated position-oriented mogul socket—the highest rating of any socket on the market. The socket is mounted on our exclusive All System cylinder and mounting disc, which adjusts each bulb for maximum reflectivity.