LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even...

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included.

6' Add A Lamp Slave (6' Push Rod/6' Rail). Move your lights back and forth across your growing area with a light mover. It helps to increase your light coverage area. Light Rail 3.5 is rated to 35...

Includes: LRAAI3.5 - A six-foot rail and a six-foot pushrod LRAALHDWARE - One auxiliary trolley and a hardware pack (screws, nuts, and a zip tie) Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is...

Normally a component in the LightRail Complete Kit, this 6' auxiliary rail can be used for extending the travel length of your LightRail setup by 6'.

10 RPM IntelliDrive motor (LR3.5ID9) w/6' rail plus mounting hardware For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 3.5 IntelliDrive is...

For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no...

The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to festoon your power cords or cooling ducts.Light...

Adjust-a-drive motor w/6' rail plus mounting hardware The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. For a rectangular growing area, a...

Auxilliary Trolley for LR3.5 (Slave Trolley)Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

EXTREME DUTY TROLLEY WHEELS, for LightRail 3.0, 3.5 and 4.0. A suggested upgrade item for moving multiple lights and/or overweight loads such as heavier LED, plasma, or any light with an internal...

The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for...

Auxiliary Trolley for the Light Rail 5.

LightRail 5 Auxiliary Rail This is used with LightRail 5 and a second Add a Bar Kit (AAB KIT LR5), see item “R”, to accommodate a 3 crossbar system. The LightRail 5 Auxiliary Rail Item is packed in...

LightRail 5 Commercial Drive 4 RPM kit From its “triple duty” extruded aluminum track, “wide and stable” carriage with “steel-on-steel” carrier bearings to the high torque 4 RPM instrument grade...

Switch Stop Kit for LightRail 3.0, 3.5 and 4.0 For replacing the occasional misplaced switch stop. The SS KIT comes with 3 pairs of switch stops and that equals 6 thumb screws and 6 slide nuts...

Adjust-a-Drive MOTOR ONLY This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to...

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. With both a zero to 60 second adjustable time delay for promoting even growth from end...

Drive Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. The Drive Wheel Kit comes packaged with a new tension spring and fasteners in a header labeled zip lock...

LightRail 4.20 AdjustaDrive Kit comes complete with a variable speed LightRail 4.0 AdjustaDrive Motor, a two-piece 2 meter (6’6”) Rail, an Add A Lamp Kit with another 2-meter Rail, Push/Pull Rod,...

RoboStik For LightRail 3.0, 3.5 and 4.0 The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to the direction of travel. This item is not needed...

These Tent Hanging Brackets will enable you to hang and run a LightRail 3.0, 3.5 or 4.0 light mover in your grow tent. They are straightforward and simple to install.  

Trolley Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. Installation is super simple, and there is even a tutorial video about it on YouTube (URL: https://www...