Controllers, Monitors & Timers

The Xtrasun LT1 Lighting Controller (XTC1100) provides dual zone lighting control for use with Xtrasun double-ended fixtures. The LT1 is capable of controlling up to 160 fixtures (80 for each zone).  The LT1 controller is specifically designed for...

Expand wall outlets and control your equipment with this 8-outlet power strip with surge protection and built-in timer. Offers 4 timed outlets and 4 always-on outlets, with indicator lights for each type. Timer has 15-minute increment pins. Timer...

Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. This model has two outlets. Features 1 second on/off Up to...

Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 1 second on/off Up to 8 on/off cycles per...

Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 15 minute on/off 24 hour cycle Controls two...

Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications. Features 15 minute on/off 15A/1725W Great for...

Controls your desired equipment during daytime only, nighttime only or both. Use to time fans, pumps or CO2 or irrigation. Displays time left in the cycle and whether the output is activated or not. Set timer for day time only, nighttime only or...

The iGS-061 is a standalone CO2 controller with high temperature shutoff that does not manage ventilationsimultaneously with CO2 level enhancement (some CO2 may be vented outside while CO2 enrichment is going on). Many growers use iGS-061 in an air...

50 ft Extension Cable for the iPonic Digital Integrated Sensor Module. • Wire/cable, black, red, green, white, PVC material, Shielded 4 conductors 24 AWG UL • A connector Female - IP68, Immersible >1M, twist and lock, in-line cable connector (4–6.5mm), 4...

You'll find multiple uses for and multiple places to put this Active Air hygro-thermometer. Check the large number LCD display from a distance, and move it around with you as you go about your gardening tasks. The hygro-thermometer's readings are...

Active Air's indoor-outdoor thermometer gives you more. Made of sturdy materials to stand up to the climate of your indoor grow room, this essential tool features a large display to read the current temperature and humidity levels. A remote probe allows...

Advanced HID Lamp Control | High temperature shutdown with selectable delay Combines all of the HLC1, HLC2, and HLC3 functions into one unit. Selectable switch lets you choose whether to run the controller for temperature shutdown, on-delay, or both. The...

The FUEL SX12 represents the latest in large scale lighting control. It is among the best devices for controlling up to 12 lights. This unit features 120/240V universal style X-plug outlets, which allow the controller to operate 120V or 240V ballasts...

The FUEL DT24 represents the latest in large scale professional lighting control. It is among the best devices for controlling up to 24 lights. This unit features 240V industrial-grade NEMA 6-15 UL-listed power outlets. All outlets are controlled by two...

The FUEL ST12 represents the latest in large scale professional lighting control. It is among the best devices for operating up to 12 lights. This unit features 240V industrial-grade NEMA 6-15 UL-listed power outlets. All outlets are controlled by a...

The FUEL ST8 represents the latest in professional lighting control. It is among the best devices for controlling up to 8 lights. This unit features 240V industrial-grade NEMA 6-15 UL-listed power outlets. All outlets are controlled by a 120V trigger...

The Autopilot Dehumidifying Humidistat is a compact and easy-to-use controller for dehumidifiers and exhaust fans. Simply plug it into a power receptacle and then plug your dehumidifying device into its outlet, then choose your preferred relative...

  PX1 Connection Cable 15 ft in length. This cable connects the Phantom DE ballast USB port to RJ12 port.  Connects Ballast USB Port to RJ12 Port RJ12 to USB PX1 Connection Cable  

  Connnects Ballast USB Cable to RJ12 Trunk-Line RJ12 to RJ12 PX1 RJ12 Splitter   

RJ12 to RJ12 Cable, 50' length.  For making RJ12 trunk line connections between PX1 and subsequent RJ12 cable splitters RJ12 to RJ12 PX1 connection cable   Note: This 50' cable can be used with the Autopilot PPM-5 APCECO2 and its remote CO2 sensor

  RJ12 to RJ12 Connection Cable 15 ft in length.  RJ12 Trunk-Line Connections Between PX1 and or Subsequent RJ12 Cable Splitters RJ12 to RJ12 PX1 Connection Cable   

The Autopilot ECLIPSE F90 Master Environmental Controller allows growers to precisely control and monitor temperature, humidity, and CO2 from one centralized unit. Its three digital screens continuous display current temperature, relative humidity,...

The Autopilot ECLIPSE F60 Digital Environmental Controller combines precise temperature and humidity control along with cycle timing to create an intelligent yet easy-to-use unit. Three digital screens continuously display current temperature, relative...

The Autopilot Cumulus S50 Digital CO2 Controller measures and controls grow room carbon dioxide levels with great precision. It can operate in Fuzzy Logic mode, ppm Up or ppm Down mode. The S50 digital display shows exact ppm readings down to 1 ppm...

The Autopilot REVOLVE F20 Repeat Cycle and Light Combo Timer controls lighting schedules and timed cycling functions in your grow area with perfect digital accuracy. It has simultaneous dual timer functions, a 24-hour time clock for lighting, and a...

More powerful, more reliable, more capable The Autopilot PX2 Advanced Lighting Controller provides precision photoperiod control of up to 512 fixtures in two independently controlled zones, all from one centralized location. Designed to work with any...

The APCTART2 is a cycle timer controller with day and night detection. It works to control any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO2...

The Autopilot Cooling Thermostat is a compact and easy-to-use controller for air conditioners and exhaust fans. Simply plug it into a power receptacle and then plug your cooling device into its outlet, then choose your preferred room temperature setpoint...

Control up to eight lights from one timer or controller device. 240V power is wired directly into the eight outlet timer box, and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 60 amps at 120/240 with eight 120/240V...

Control multiple lights from one timer or controller device. Power is wired directly into the four-outlet timer box and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 30 amps at 120/240 volts. The trigger cable can be...

15' Extension Probe Sensor Cable for the Greenhouse Master Controller and the Digital CO2 Controller. Extension cable is compatible with the following Autopilot models ONLY: APCECOTH, APCECOD, APE2200, APE3100, APE4100 and APE4200

Autopilot 24 hr Day & Night Cooling/Heating ThermostatThe APCET2 is a temperature controller that can be used as a cooling OR a heating device. It automatically powers the device connected based on the selected day and night set points. The user can...

Records and Exports 1 Year of Environmental Data! Developed to detect the presence of CO2 and to monitor temperature & relative humidity in ambient air, this device is smart, compact and easy to use. Its high quality LCD display, and it features...

Accuracy, innovative features, and unbeatable affordability in one small, user-friendly CO2 monitor. To deliver its measurements, the Autopilot APCEM2 Desktop CO2 Monitor features a clear display system that boasts a digital memory chart of recorded CO2,...

APCECOTH Greenhouse Master Controller Replacement Probe

Digital CO2 Controller Fuzzy Logic Replacement Probe for the Autopilot APCECOD.

Autopilot's simple to use highly accurate digital CO2 controller has arrived. Autopilot's digital CO2 controller measures the carbon dioxide level in the grow room and automatically turns on and off the CO2 device to accurately keep the carbon dioxide...

The Autopilot PPM-5 CO2 Controller is a simple and affordable way to control your CO2 injection device. Choose your desired CO2 parts per million (PPM) level, and the controller will automatically maintain that...

To sample CO2 levels in room air further from the controller (up to 30’ away), use this 15' sensor extension cable.

Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes,...

The Autopilot APBC1001 signal conversion module is ideal for facilities utilizing commercial environmental controllers to control lighting. The module converts analog 0–10V and 0–11.5V signal into digital RS-485 signal. It features two analog inputs and...

One (1) outlet. 1 min intervals and run up to 20 schedules per day. Battery backup feature saves settings in case of power failure. Heavy-duty construction. Daylight savings mode to accommodate time change. Enclosure resists dust, rust and moisture. Runs...

The Apollo� 10 - 240 V /24 hr timer is the perfect timing solution for your hydroponic systems. With a 10 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo� 10 has 96 non-detachable 15 min trippers and can be configured in numerous...

The Apollo� 7 - 24 hr digital timer is the perfect timing solution for your hydro systems. With a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo� 7 may be set to 1 min intervals and run 8 separate schedules per day. Can be...

The Apollo� 6 - 24 hr timer is the perfect timing solution for your hydro systems. With a 12 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo� 6 has 96 non-detachable 15 min trippers and can be configured in numerous timing...

The Apollo� 9 - 24 hr digital timer is the perfect timing solution for your hydro systems. With two outlets and a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo� 9 may be set to 1 min intervals and run 8 separate schedules per...

The Apollo� 8 - 24 hr timer is the perfect timing solution for your hydro systems. With two outlets and a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo� 8 has 96 non-detachable 15 min trippers and can be configured in...

The 8 light controller operates up to 8000 W of grow lights in your garden. It features heavy-duty definite purpose contactors, dual trigger cord sets that give you the flexibility to stagger lighting schedules or delay starting times via an external...

The 4 light controller operates up to 4000 W of grow lights in your garden. It features heavy-duty definite purpose contactor, trigger cord set that activates your lights via an external wall timer and universal outlets that allow the use of 120 V or 240...

CO2 is scientifically proven to improve the performance of plants! The Ares® Series CO2 generators provide a clean and efficient way to enrich your grow area with CO2. Ares® Series CO2 generators come with everything you need to get your CO2 system...